4200 S. Nevada, St.Francis, WI 53235





Performance beyond expectations

home   help contact


Titex Drill selector

Prototyp Tap Selector

Walters Milling Selector







Centrifugal Mist Collectors

Screw machines, CNC lathes, chuckers, and bar machines produce mist and smoke. Mist Collectors remove, trap, and reclaim submicronic contaminants from the plant atmosphere—right at the source!

Aer Control Mist Collectors operate on the principle of centrifugal separation of sub-micron particles. A perforated, rapidly spinning drum traps and retains captivated mist until it's grown to droplet size. Centrifugal force throws the droplets free of the perforated drum to the inner wall of the casing. High velocity air drives the liquefied oil along the walls and through the circumferential slot into a collection chamber. Clean air returns to the plant environment, by way of the exhaust grill, and the clean, recycled oil drains from the unit for reuse or disposal.

Designed to source-capture air pollutants, choose a Mist Collector if you need a compact unit to mount directly to a machine and when the contaminants are usually just mist and smoke. Directly mounted units eliminate unsightly ductwork, venting outdoors, and the high cost of make-up air. Housed in a sturdy, 16-gauge steel encasement, Aercology Mist Collectors stand up to tough, industrial environments. Units weigh from only 70 to 125 lbs. and operate from only 70 to 74 dBA. CFM capabilities range from 100 to 1000. Standard features include a coated, perforated rotating drum, large collection chamber, and advanced drain system. Maintenance is easy—just replace the inexpensive throwaway liner.

Standard Mist Collectors deliver a particulate efficiency of 98% at 1.0 micron. When equipped with an optional HEPA filter, efficiency is 99.97% at 0.3 microns. Mist Collectors are available with high performance in-cover or in-line prefilters for removal of swarf and large chips and in-cover impingers for applications with heavy concentratnions of fine mist.


Centrifugal Mist Collector
Filters coolant mist, smoke, gas, and vapor
Four stages of filtration
Manufactured out of 16ga spun steel, powder coated
Quiet Operation 70 to 76 dba @ 3’
Small and Compact with Direct Mount Capability

The centrifugal mist collector is typically used on applications generating airborne coolant mist, smoke, gas, and vapor.

View Acrobat Spec Sheet
View Acrobat Installation & Service Manual
Replacement Filters Available
Centrifugal Mist Collectors Replacement Filters

Click Here for other Mist collection equipment

To view the information you must have Acrobat reader.
Download by clicking on the icon.

ActiveEdge ™ 6The left picture is the COOLANT DRIVEN DRILLS and I.D. SLOTTING TOOLS.  The right Picture is an ACTIVE EDGE self-adjusting boring tool.

Power Grip is replacing traditional shrink-fit systems.  No heat but better torque....(more)