Conomatic Toolholders NOTE: All holders in this section are right hand or inner type (components toward the spindle). Left hand or outer type holders are available upon request.
Machine			Toolholder
			Capacity
Number of Splindles	Capacity	Shank Height		Width				Toolholder Number	Component Group*
			Depth	3/32	1/8	.160	3/16
4	7/8	1-1/2	To center					206-345	2
								206-381	3
	1, 1-1/4, 1-1/2	1-3/4	.50					206-382	3
			.50					206-346	2
			To center
	2	1-3/4	.50					206-382	3
			.50					206-346	2
			.81
			To center					206-350	3
	2-1/4, 2-5/8	2-1/2	.50					206-383	3
			.50					206-347	2
			.81
			To center					206-353	4
	2-1/4	3	.50					206-384	3
			.50					206-348	2
			.81
			To center					206-352	3
	2-5/8, 3-1/2	3	.50					206-384	3
			.50					206-348	2
			.81
			1.44**					206-354	4
6	1, 1-1/4	1-1/2	.50					206-381	3
			.50					206-345	2
			To center
	1, 1-1/4, 1-3/8, 1-5/8	1-3/4	.50					206-382	3
			.50					206-346	2
			To center
	2	1-3/4	.50					206-382	3
			.50					206-346	2
			.81
			To center					206-350	3
	2-1/4	2-1/2	.50					206-383	3
			.50					206-347	2
			.81
			To center					206-351	3
	2-5/8, 3, 3-1/2, 4	2-1/2	.50					206-383	3
			.50					206-347	2
			.81
			1.37**					206-353	4
	3-1/2, 4, 4-1/4	3	.50					206-384	3
			.50					206-348	2
			.81
			1.34**					206-354	4
8	1, 1-1/4, 1-1/2, 1-5/8	1-3/4	.50					206-382	3
			.50					206-346	2
			To center
	1-7/8	1-3/4	.50					206-382	3
			.50					206-346	2
			.81
			To center					206-350	3
	2-1/4	2-1/2	.50					206-383	3
			.50					206-347	2
			.81
			To center					206-351	3
		3	.50					206-384	3
			.50					206-348	2
			.81
			1.07**					206-352	3
	2-5/8, 3	2-1/2	.50					206-383	3
			.50					206-347	2
			.81
			To center					206-353	4
* Click on the number to see Component Group information. ** Available Depth Of Cut At Machine Capacity.

Back to Cutoff Products