Acme Gridley Toolholders NOTE: All holders in this section are right hand or inner type (components toward the spindle). Left hand or outer type holders are available upon request.
Machine			Toolholder
			Capacity
Model	Capacity	Position		Width				Toolholder Number	Component Group*
			Depth	3/32	1/8	.160	3/16
RA-6	7/16	5	To center					206-145	1
								206-175	1
RA-6 RAN-6	9/16, 1	2 & 5	To center					206-331	2
RN-6	5/8	5	To center					206-331	2
RA-6	1-1/4	2 & 5	.50					206-310	2
			To center
		5DD	To center					206-388	5
RB-6	1-5/8, 2	2	.50					206-372	3
			.50					206-311	2
			.81
			To center					206-319	3
		5	.50					206-312	2
			.81
			To center					206-320	3
RB-6	2-5/8	2	.50					206-375	3
			.50					206-313	2
			.81
			To center					206-321	4
		5	.50					206-376	3
			.50					206-314	2
			.81
			To center					206-322	4
RB-6	3-1/2	2 & 5	.50					206-377	3
			.50					206-315	2
			.81
			1.44**					206-323	4
RB-6	4	2	.50					206-379	3
			.50					206-316	2
			.81
			1.37**					206-324	4
		5	.50					206-378	3
			.50					206-317	2
			.81
			1.37**					206-325	4
RB-6	6	5	.50					206-380	3
			.50					206-318	2
			.81
			1.12**					206-326	4
RA-8	3/4	3 & 6	To center					206-332	2
RB-8 RBN-8	1-1/4	3 & 6	.50					206-329	2
			To center
		7DD	To center					206-388	5
RB-8 RBN-8	1-5/8	3 & 6	.50					206-329	2
			To center
		7DD	.50					206-388	5
RB-8	1-5/8, 2	3 & 6	.50					206-377	3
			.50					206-315	2
			.81
			To center					206-330	3
RB-8	2-5/8, 3-1/2	3 & 6	.50					206-377	3
			.50					206-315	2
			.81
			1.44**					206-323	4
RB-8	4	6	.50					206-380	3
			.50					206-318	2
			.81
			1.37**					206-326	4
* Click on the number to see Component Group information. ** Available Depth Of Cut At Machine Capacity.

Back to Cutoff Products 

Click here for next Screw Machine Holder page

Click here for last Screw Machine Holder page

Click here to see inserts